hastemplate.blogg.se

Command aire geothermal heat pump manual
Command aire geothermal heat pump manual









Geothermal uses electricity to power the loop circulation pumps or the well pump and the heat pump compressor. If you do not have a sufficient well, then the cost is higher as you need to drill wells deep enough or excavate horizontal loops to use the earth's temperature. If you have a water well that produces a sufficient amount of water, the initial cost can be minimized by using a open loop system. In other words, it's like heating and cooling your home when it's 50 degrees outside all year! This works the same as a standard air conditioner, except a geothermal system uses water or loop fluid at a constant temperature (average 50 degrees) instead of varying outdoor temperature. In air conditioning, geothermal systems take heat from the structure, transfer the heat to the refrigerant, then transfer the heat back to the water or loop fluid. Quite simply, geothermal systems in heating take heat from the earth, transfer that heat to a refrigerant, then distribute the heat into the structure with a forced-air or hydronic system. This is accomplished with a compressor or heat pump unit, the liquid heat exchanger medium, and the air delivery system. Geothermal heating and cooling systems use the natural constant ambient temperature of the earth to heat in the winter and cool in the summer. Some systems are used for heating domestic hot water.

command aire geothermal heat pump manual

Some geothermal heat pumps provide heating and cooling via forced air distribution, and others through the heating and/or chilling of water for radiant floor systems.

command aire geothermal heat pump manual

A geothermal heat pump uses the extracted water or transfer fluid (such as water mixed with antifreeze) as a heat source in winter and a heat sink in summer.

command aire geothermal heat pump manual

This is accomplished by one of a number of methods. In climates warmer than 55, this can be used to air condition a building, and in colder climates (those under 55 it can be used for heating. Normally the earth temperature is around 55 degrees F (13 degrees C) at depths of 10 ft. How Geothermal Heating Works Geothermal heating and cooling takes advantage of the natural stable warmth stored in the earth.











Command aire geothermal heat pump manual